Hellermann Tyton North America
HellermannTyton's Two Piece Edge Clip with Cable Tie Assemblies are designed specifically to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole. The clip is easy to secure and the extraction force is high due to the integrated metal clamp that holds the edge clip in place. EC4A orientation allows cables to run parallel to the edge. The lowprofile cable tie features a compact, contoured head that uses less space in confined areas and reduces protrusions that might otherwise interfere with or damage adjacent wire insulation and hoses. The outside serration provides a smooth inside surface to further minimize indentation or damage to soft bundles while offering high tensile strength and low insertion force. The cable tie and edge clip assembly is ideal for use where holes are not acceptable or where adhesives will fail due to temperature extremes. Edge clips are widely used for attaching cables and wires within automotive, trucking, heavy equipment, solar panel, wind power and white goods equipment manufacturing.

2-Pc Low Profile Cable Tie & EC4A Edge Clip, 7.7"L, 1–3 mm Panel, 50lb, PA66HS/PA66HIRHSUV, Black, 500/bg


156-03945
Product image
Zoom In Zoom Out Enlarge

    Features & Benefits

    Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole.
    Edge Clip provides low insertion force and high extraction force ideal for assembly environments.
    Two-piece assembly allows the mount to slide along the strap, ensuring proper orientation.
    Cable tie is outside serrated to reduce bundle chafing.
    Low profile cable tie helps bundle wires neatly to accommodate wire harnesses with smaller diameters.
    Low profile head won’t snag on surrounding parts and wires.

    Certifications & Approvals

    • Rohs Certified
    156-03945
    LPT50REC4A
    Black (BK)
    bag
    HellermannTyton's Two Piece Edge Clip with Cable Tie Assemblies are designed specifically to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole. The clip is easy to secure and the extraction force is high due to the integrated metal clamp that holds the edge clip in place. EC4A orientation allows cables to run parallel to the edge. The lowprofile cable tie features a compact, contoured head that uses less space in confined areas and reduces protrusions that might otherwise interfere with or damage adjacent wire insulation and hoses. The outside serration provides a smooth inside surface to further minimize indentation or damage to soft bundles while offering high tensile strength and low insertion force. The cable tie and edge clip assembly is ideal for use where holes are not acceptable or where adhesives will fail due to temperature extremes. Edge clips are widely used for attaching cables and wires within automotive, trucking, heavy equipment, solar panel, wind power and white goods equipment manufacturing.
    2-Pc Low Profile Cable Tie & EC4A Edge Clip, 7.7"L, 1–3 mm Panel, 50lb, PA66HS/PA66HIRHSUV, Black, 500/bg
    LPT50REC4A-PA66HS/PA66HIRHSUV-BK
    50.0
    225.0
    7.7
    194.6
    EdgeClip, top, assembled, 2 piece
    none
    No
    0.18
    4.6
    0.16
    4.0
    2.0
    51.0
    0.05
    1.2
    0.05
    1.20
    0.2
    4.8
    0.04
    0.12
    1.0
    3.0


    500
    500
    Polyamide 6.6 heat stabilized (PA66HS) Polyamide 6.6 high impact modified, heat and UV stabilized (PA66HIRHSUV)
    PA66HS PA66HIRHSUV
    Polyamide 6.6 heat stabilized (PA66HS)
    -40°F to +221°F (-40°C to +105°C) -40°F to +230°F (-40°C to +110°C)
    Yes