Heat Shrink Molded Shapes, Thick-Wall, -55 °C to +135 °C, 10.7/7.9mm, for ⌀8.46-10.14 mm, PO-X, BK, 1/bag
Art.-No. 401-13007
|
|
Copied
- Provides strain relief for connector cable.
- Easy re-entry for repair when combined with hot melt adhesive.
| Application | Heat Shrinkable moulded shapes for use in Electrical and Electronic Cable Harness Applications. |
| Color | Black (BK) |
| Description | Helashrink 100 series, without rib, provides connector cable strain relief. Can be installed on the connector rear thread or plain shaft and allows easy re-entry for repair when combined with a hot melt adhesive. |
| PART DESCRIPTION | 113-1-JWM250-PO-X-BK |
| Packaging Type | bag |
| Part No. | 401-13007 |
| Short Description | Heat Shrink Molded Shapes, Thick-Wall, -55 °C to +135 °C, 10.7/7.9mm, for ⌀8.46-10.14 mm, PO-X, BK, 1/bag |
| Type | 113-1-JWM250 |
|
|
|
| Flexibility | Flexible |
| For Object Outside Diameter | 8.46-10.14 mm |
| H Recovered Dia. Max. b (imperial) | 0.31" |
| H Recovered Dia. Max. b (metric) | 7.9mm |
| H Supplied Dia. Min. a (imperial) | 0.42" |
| H Supplied Dia. Min. a (metric) | 10.7mm |
| HW ± 20 % | 1.3mm |
| HW ± 20% | .05" |
| J Supplied Dia. Min. a (imperial) | .18" |
| J Supplied Dia. Min. a (metric) | 4.6mm |
| Max. R | .57" |
| P ± 10 % | 25.4mm |
| P ± 10% | .99" |
| R max. | 14.5mm |
| S Nominal Length (imperial) | .18" |
| S Nominal Length (metric) | 4.6mm |
| Tensile Strength | 19MPa |
| Tube Shape | Bottle |
