Heat Shrink Molded Shapes, Thick-Wall, -55 °C to +135 °C, 30/22.4mm, for ⌀23.92-28.48 mm, PO-X, BK, 1/bag
Art.-No. 401-11002
|
|
Copied
- Provides strain relief for connector cable.
- Easy re-entry for repair when combined with hot melt adhesive.
| Application | Heat Shrinkable moulded shapes for use in Electrical and Electronic Cable Harness Applications. |
| Color | Black (BK) |
| Description | Helashrink 100 series, without rib, provides connector cable strain relief. Can be installed on the connector rear thread or plain shaft and allows easy re-entry for repair when combined with a hot melt adhesive. |
| PART DESCRIPTION | 111-1-B7WM250-PO-X-BK |
| Packaging Type | bag |
| Part No. | 401-11002 |
| Short Description | Heat Shrink Molded Shapes, Thick-Wall, -55 °C to +135 °C, 30/22.4mm, for ⌀23.92-28.48 mm, PO-X, BK, 1/bag |
| Type | 111-1-B7WM250 |
|
|
|
| Flexibility | Semi rigid |
| For Object Outside Diameter | 23.92-28.48 mm |
| H Recovered Dia. Max. b (imperial) | 0.87" |
| H Recovered Dia. Max. b (metric) | 22.4mm |
| H Supplied Dia. Min. a (imperial) | 1.17" |
| H Supplied Dia. Min. a (metric) | 30mm |
| HW ± 20 % | 3.1mm |
| HW ± 20% | .12" |
| J Recovered Dia. Max. b (imperial) | .28" |
| J Recovered Dia. Max. b (metric) | 7.1mm |
| J Supplied Dia. Min. a (imperial) | .57" |
| J Supplied Dia. Min. a (metric) | 14.7mm |
| Max. R | 1.68" |
| P ± 10 % | 76.2mm |
| P ± 10% | 2.97" |
| R max. | 43.2mm |
| S Nominal Length (imperial) | .59" |
| S Nominal Length (metric) | 15.2mm |
| Tensile Strength | 13MPa |
| Tube Shape | Bottle |
