Heat Shrink Molded Shapes, With inner glue (Yes/No), -45 °C to +125 °C, 1.0/3.0mm, for ⌀2.6-1.4 mm, PO-X, BK, 50/bag
Art.-No. 416-00000
|
|
Copied
- The PEC-Series can be applied fast and easy as standard heat shrink tube.
- The inner adhesive liner and the adhesive plug provide an excellent bond and protection from water ingress.
- The optimal shrink ratio of 3:1 and different diameters allow a wide range of application.
- Other diameters and lenghts are available on request.
| Application | Pinched end caps are pieces of heat shrink tubing shrunk onto a filler to create an end cap. Our heat shrink caps are designed to seal and protect wire ends, such as stub splices. |
| Color | Black (BK) |
| Description | PEC is used to seal and protect wire ends such as stub splices with inner adhesive. The adhesive liner provides protection from water ingress. |
| Global Part Number | PEC-3/1-PO-X-BK |
| Packaging Type | bag |
| Part No. | 416-00000 |
| Short Description | Heat Shrink Molded Shapes, With inner glue (Yes/No), -45 °C to +125 °C, 1.0/3.0mm, for ⌀2.6-1.4 mm, PO-X, BK, 50/bag |
| Type | PEC-3/1 |
| For Object Outside Diameter | 2.6-1.4 mm |
| H Recovered Dia. Max. b (imperial) | 0.12" |
| H Recovered Dia. Max. b (metric) | 3.0mm |
| H Supplied Dia. Min. a (imperial) | 0.04" |
| H Supplied Dia. Min. a (metric) | 1.0mm |
| HW ± 20 % | 1.0mm |
| HW ± 20% | .04" |
| Length (imperial) | .98" |
| Length (metric) | 25.0mm |
| Length 2 (imperial) | .79" |
| Length 2 (metric) | 20.0mm |
| Longitudinal Change After Shrinkage | -10% max. |
| Nominal Adhesive Thickness (metric) | 0.5mm |
| P ± 10 % | 25.0mm |
| P ± 10% | .98" |
| Recovered Diameter (imperial) | .04" |
| Recovered Diameter (metric) | 1.0mm |
| Shrink Ratio | 3:1 |
| Supplied Diameter (imperial) | .12" |
| Supplied Diameter (metric) | 3.0mm |
| Tensile Strength | 10.4MPa |
| Tube Shape | Specialty |
| Volume Resistance | 10¹⁴ Ω cm |
| Wall Thickness (imperial) | .04" |
| Wall Thickness (metric) | 1.0mm |
| Dielectric Strength | 15kV/mm |
| Dielectric Strength test method | IEC 684 P2 |
| Elongation at break (min.) | 300% |
| Flammability | Self-extinguishing in 30 seconds according to SAE-AMS-DTL-23053/4 |
| Material | PO-X |
| Material | Polyolefin, cross-linked (PO-X) |
| Min. Shrink Temperature | +248 °F (+120 °C) |
| Operating Temperature | -49°F to +257°F (-45°C to +125°C) |
| REACH Conformity | No |
| ROHS Compliant | Yes |
| UL Recognized (US and Canada) | No |
| UL Recognized (US) | No |
| Volume Resistance test method | ASTM D2671 |
