Hellermann Tyton North America
HellermannTyton sealed clips and ties are constructed of engineered nylon with a dual TPE (thermo plastic elastomer) seal. The combination of dual seal and engineered arrowhead provide superior sealing performance for applications where protection from moisture and debris is essential.

2-Pc Tie & Arrowhead Mnt w/ Seal, 1.2-1.8mm panel,6.5mm/6.35mm HEX,PA66HIRHSUV/TPE, BK/GY, 2,000/ctn


156-02544
Product image
Zoom In Zoom Out Enlarge

    Features & Benefits

    Once installed, perpendicular arrowhead arms reduce movement and will not collapse when exposed to water or load.
    Integrated dual seal meets IP65 for protection against water, dust, chemicals, air and sound.
    15 mm and 25 mm offset designs fasten bundles away from obstructions, heat or sources of abrasion.
    Superior design and high-spec materials maintain routing position to deliver consistent performance in the most rugged applications.
    Low-profile design saves 5 mm of height when installed.
    All ties rated to 222 N (50 lb) tensile strength to ensure long-term bundling reliability.
    Sealed arrowhead meets USCAR44 push in, pull off and sealing standards.

    Certifications & Approvals

    • Rohs Certified
    156-02544
    T50ROS25BCCSRAH1.4T
    Gray (GY) Black (BK)
    box
    HellermannTyton sealed clips and ties are constructed of engineered nylon with a dual TPE (thermo plastic elastomer) seal. The combination of dual seal and engineered arrowhead provide superior sealing performance for applications where protection from moisture and debris is essential.
    2-Pc Tie & Arrowhead Mnt w/ Seal, 1.2-1.8mm panel,6.5mm/6.35mm HEX,PA66HIRHSUV/TPE, BK/GY, 2,000/ctn
    T50ROS25BCCSRAH1.4T-PA66HIRHSUV/TPE-BK/GY
    50.0
    222
    8.97
    228
    0.98
    25.0
    Arrowhead
    none
    plastic pawl
    1.11
    28.4
    0.078
    2
    1.96
    50
    0.728
    18.5
    1.2
    1.8
    0.25 " (hexagonal); 0.25
    6.35 mm (hexagonal) 6.5 mm


    2000
    2000
    3926909988
    Thermoplastic Elastomer (TPE) Polyamide 6.6 high impact modified, heat and UV stabilized (PA66HIRHSUV)
    TPE PA66HIRHSUV
    -31°F to +194°F (-35°C to +90°C) -40°F to +230°F (-40°C to +110°C)
    Yes