Hellermann Tyton North America
HellermannTyton sealed clips and ties are constructed of engineered nylon with a dual TPE (thermo plastic elastomer) seal. The combination of dual seal and engineered arrowhead provide superior sealing performance for applications where protection from moisture and debris is essential.

2-Piece Cable Tie/Arrowhead Mount with Seal, 0.6 - 1.1mm panel, 6.5mm/6.35mm HEX, PA66HIRHSUV/TPE, Black, 4000/ctn


156-01711
Product image
Zoom In Zoom Out Enlarge

    Features & Benefits

    Once installed, perpendicular arrowhead arms reduce movement and will not collapse when exposed to water or load.
    Integrated dual seal meets IP65 for protection against water, dust, chemicals, air and sound.
    15 mm and 25 mm offset designs fasten bundles away from obstructions, heat or sources of abrasion.
    Superior design and high-spec materials maintain routing position to deliver consistent performance in the most rugged applications.
    Low-profile design saves 5 mm of height when installed.
    All ties rated to 222 N (50 lb) tensile strength to ensure long-term bundling reliability.
    Sealed arrowhead meets USCAR44 push in, pull off and sealing standards.

    Certifications & Approvals

    • Rohs Certified
    156-01711
    T50RSRAH6.5SD
    Black (BK)
    bag
    HellermannTyton sealed clips and ties are constructed of engineered nylon with a dual TPE (thermo plastic elastomer) seal. The combination of dual seal and engineered arrowhead provide superior sealing performance for applications where protection from moisture and debris is essential.
    2-Piece Cable Tie/Arrowhead Mount with Seal, 0.6 - 1.1mm panel, 6.5mm/6.35mm HEX, PA66HIRHSUV/TPE, Black, 4000/ctn
    T50RSRAH6.5SD-PA66HIRHSUV/TPE-BK
    50
    225
    8.0
    200
    Arrowhead
    none
    plastic pawl
    0.18
    4.6
    0.12
    3.0
    1.97
    50.0
    0.52
    13.25
    0.02
    0.04
    0.6
    1.1
    0.25 (hexagonal) ";0.26
    6.5 mm 6.35 mm (hexagonal)
    0.25
    0.26
    6.5


    4000
    4000
    3926909988
    Polyamide 6.6 high impact modified, heat and UV stabilized (PA66HIRHSUV) Thermoplastic Elastomer (TPE)
    PA66HIRHSUV TPE
    Polyamide 6.6 high impact modified, heat and UV stabilized (PA66HIRHSUV)
    Yes
    For Indoor and Outdoor Use
    -40°F to +221°F (-40°C to +105°C)
    Yes
    Yes