Hellermann Tyton North America

Customer Connection Enclosure, No Adapters, Screw Lock, Black, 1/pkg


CCE-111XXX-B
857-01434
Product image
Zoom In Zoom Out Enlarge

    Features & Benefits


    Black, UV stable enclosure with IP54 (NEMA 3S) sealing rating for long-term outdoor performance.
    Internal positive fiber management and fiber retention clips maintain a minimum 30 mm bend radius throughout, ensuring reliable data throughput.
    Hinged lid allows quick and clear access to internal fiber for splicing and termination.
    CCE is same width as a brick blow-out cover to mask any bricks damaged by drilling.
    857-01434
    CCE-A1112XXX1/BK
    Black (BK)
    Black, UV stable enclosure with IP54 (NEMA 3S) sealing rating for long-term outdoor performance. •Internal positive fiber management and fiber retention clips maintain a minimum 30 mm bend radius throughout, ensuring reliable data throughput. •Hinged lid allows quick and clear access to internal fiber for splicing and termination. •CCE is same width as a brick blow-out cover to mask any bricks damaged by drilling.
    EA
    The Customer Connection Enclosure (CCE) is a Building Entry Point (BEP), providing a fiber termination and network demarcation point external to the connected premise in a Fiber to the Home (FTTH) network. In addition to providing an external test point, the enclosure stores up to 50 m of 1.1 mm cable. A loop-through facility allows for single fiber elements to be removed and spliced while the remaining fiber can be fed on to the next connection point. A single port in the rear of the closure allows fiber to be passed through the wall into the customer premises. Supplied cable ties secure all incoming/outgoing cables/blown fiber ducts and provide strain relief where necessary. The CCE can be supplied pre-loaded with fiber adapters and pigtails as required. •2x SC Simplex/LC Duplex customer connections for redundancy or multiple connections. •4x heat shrink splices accommodate connections to the adapters or drop cables. •6 incoming/outgoing ports and through-the-wall port to support multiple incoming and drop cables up to 7 mm in diameter. •Can store up to a maximum of 50 m of 1.1 mm cable.
    Customer Connection Enclosure, No Adapters, Screw Lock, Black, 1/pkg
    CCE-A1112XXX1/BK
    The Customer Connection Enclosure (CCE) supports a maximum 2 x SC Simplex or LC Duplex adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure which are suitable for cables and ducts up to a maximum diameter of 8.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout for up to a maximum of 50m of 1.1mm diameter cable.
    CCE Enclosure, Black Foam Sealing grommets 3x Wall mounting screw and anchor 3x Red cable tie Phillips screw lock
    Outdoor FTTx Enclosures
    5.12
    130
    10.35
    263
    1.46
    37


    1
    1
    9030400000
    Acrylonitrile Butadiene Styrene, UV-stabilized (ABSUV)
    ABS